Rolling Machine
Home>Products>Rolling Machine> Powered And Manual Slip Roll >R-5016E
R-5016E
Powered & Manual Slip Rolling Machine
Standard Features
- 2-driving rolls.
- Double pinch rolls.
- DRO for double pinch rolls position.
- All rolls are made of top-grade ally steel hardened up to HRCSS".
- Hydraulic powered pinch and rear roll adjustment.
- Foot switch for rolls forward / reverse / up & down / pinch adjustment conveniently.
- Hydraulic circuits, which is protected against overload, is fully enclosed to provide low-noise & leak-proved flow system.
- Cone attachment.
Specifications
| Model | R-2420 | R-3622 | R-5016 | R-2420E | R-3622E | R-5016E |
| Length (mm) | 610 (24") | 762 (36") | 1270 (50") | 610 (24") | 762 (36") | 1270 (50") |
| Capacity (Mild Steel) (mm) | 1.0 (20GA) | 0.8 (22GA) | 1.6 (16GA) | 1.0 (16GA) | 0.8 (22GA) | 1.6 (16GA) |
| Dia. of Roll (mm) | 50 (2") | 50 (2") | 75 (3") | 50 (3") | 50 (2") | 75 (3") |
| Wire Grooves | 3 | 3 | 3 | 3 | 3 | 3 |
| Minimum Forming Radius (mm) | 35 (1.4") | 35 (1.4") | 50 (2") | 35 (1.4") | 35 (1.4") | 50 (2") |
| Gear Ratio | 1:1 | 1:1 | 3:1 | |||
| Roll Speed (rpm) | 38 | 38 | 16 | |||
| Motor (hp) | 0.5 | 0.5 | 1 | |||
| Packing Size (mm) | 1000 x 480 x 510 | 1350 x 480 x 510 | 1760 x 480 x 630 | 1030 x 60 x 110 | 1330 x 60 x 110 | 1850 x 510 x 1150 |
| Net Weight (kgs) | 50 | 75 | 220 | 165 | 200 | 300 |
* The above specifications subject to change without prior notice.
Relative Products :
- Home>Products>Rolling Machine> Initial-Pinch Plate Bending Roll >PR-0650H
- Home>Products>Rolling Machine> Initial-Pinch Plate Bending Roll >PR-0545H
- Home>Products>Rolling Machine> Initial-Pinch Plate Bending Roll >PR-0425H
- Home>Products>Rolling Machine> Powered And Manual Slip Roll >R-5016E
- Home>Products>Rolling Machine> Powered And Manual Slip Roll >R-5016
- Home>Products>Rolling Machine> Powered And Manual Slip Roll >R-3622E
- Home>Products>Rolling Machine> Powered And Manual Slip Roll >R-2420
- Home>Products>Rolling Machine> Double-Pinch Plate Bending Roll >HR-0813
- Home>Products>Rolling Machine> Double-Pinch Plate Bending Roll >HR-1006